Box electronics steps
Tools
- philips screwdriver
Materials
- assembled box
- assembled encoderboard with cables attached
- assembled buttonboard with cables attached
- caps for buttons
- cable
- 6 hexagonal spacer bolts, 7mm length, on one end threaded, one end with screw
- nylon button caps, 7mm diameter
- 22 - 26 nuts, M3
- 10 screws, M3, 11mm
Assembled encoderboard and Buttonboard. Unlike shown in this instructions, please have the cables and plugs already attached.
Add spacer bolds.
Spacer bolds added.
Screw encoderboard to box.
The assembled buttonboard.
Use nuts as spacers to flush out the button caps to the outer side of the box.
Insert buttonboard onto the four screws.
Pliers may help to tighten the screws to the nuts.